Some additional materials such as ceramsite, powder coal ash, or pumice were placed in microconcrete, the Young s modules of microconcretes, that were maintained for 7 days and for 28 days, were measured and compared.
在微?;炷林刑砑犹樟?、粉煤灰、浮石等不同的骨料,養護7d和28d后對其進行彈性模量的測試,對無添加骨料和添加不同骨料的微?;炷恋膹椥阅A窟M行了對比分析。
Comparison on applications of different screen meshes to presizing for artificial aggregate processing system
不同篩網在人工骨料加工系統預篩中的使用比較
From production cooperation and the goal of pitch compound than leaving ,through falling for the hot material storehouse bone material in pitch compound production course storehouse quite the sampling screening etc.
從瀝青混合料的目標和生產配合比出發 ,通過對瀝青混合料生產過程中熱料倉骨料落倉有所偏頗、骨料的取樣篩分等過程進行跟蹤分析 ,對可能發生的熱料倉骨料顆粒組成的變異進行了探討 ,旨在減少在實際生產中該變異的發生 ,使生產的瀝青混合料的質量更趨穩定。
Technical Research on Heavy Oil Fuel Used in Agregate Heating System of Bitumen Blending Tower
瀝青拌合樓骨料加熱系統使用重油燃料的技術探討
gun-applied furnace insulation
噴涂的加熱爐絕熱材料
In Pitch Compound Production the Hot Material Storehouse Variation of Bone Material Pellet Composition;
瀝青混合料生產中熱料倉骨料顆粒組成的變異
refractory-lined chamber
耐火材料內襯加熱室
INFLUENCE OF AGGREGATE SIZE ON THERMAL EXPANSION PROPERTY OF CONCRETE
骨料粒徑對混凝土熱膨脹性能的影響
Once the water is heated, it is kept hot with material called insulation.
水加熱后就會通過絕熱材料來保溫,
To melt the charge, radio frequency(induction heating)or resistance heating have been used.
為了熔化進料,可用射頻(感應加熱)或電阻加熱法。
Dyeing barrel, adding material pump, churning device.
配備加料、攪拌、進水和加熱系統的顏料桶。
The Analysis of Developing Strategy about the Typical Feed Processing Enterprises in Sichuan;
四川骨干飼料加工企業發展戰略分析
The lack of fine fractions in the expanded clay necessitates the addition of other aggregates.
膨脹性粘土缺乏細料部分,故必須添加其它骨料。
Treatment of Type C_3 Fracture of Distal Femur by Locking Compression Plate Combined Osteoinduction Active Material and Autogenic Bone Graft
鎖定加壓鋼板加骨誘導活性材料和自體骨治療股骨遠端C_3型骨折療效分析
Performance of thermoset rubber but processed like thermoplastic.
熱固性橡膠之性能,熱塑性塑料之加工方法 .
Suitable for Water (Potable) Heating and Space Heating
可用于飲料水加熱系統或建筑物供熱系統
TRANSIENT COUPLED HEAT TRANSFER IN HIGH TEMPERATURE CERAMICS SUBMITTED TO AERODYNAMIC HEATING
氣動加熱下高溫陶瓷材料內的瞬態耦合換熱
Development of Inductive Heater in Butt-fusion Welding Machine for Pressurized Plastic Pipes;
塑料壓力管道熱熔對接焊機感應加熱板的研制
Experimental Investigation of Thermophysical Properties of Insulation Material and the Characteristics of Typical Disfigurements on Furnace Liner;
加熱爐保溫材料熱物性及特征缺陷的實驗研究
Research on Temperature Field of Hot-forming Heating Device by Numerical Simulation
熱成形板料加熱裝置溫度場數值模擬研究
Research on Heat and Mass Transfer Within Moisture Recycled Asphalt Mixtures Subjected to Microwave Heating
微波加熱濕舊瀝青混合料的傳熱傳質研究
Copyright ? mingxiaow.com All Rights Reserved. 杭州優配網絡科技有限公司 版權所有 未經書面允許不得轉載、復制信息內容、建立鏡像
本網站內容僅供參考,請以各學校實際情況為主!內容侵權或錯誤投訴:841539661@qq.com 工信部備案號:浙ICP備20019715號