WEDM machine

The Discussion of the Problem of Cutting Silk for WEDM and the Solution;

探討高速走絲電火花線切割機斷絲的原因及解決方法

The causes of wire-breaking and solving ways about HS-WEDM;

高速走絲線切割機斷絲原因的分析及對策

Failure mode and cause analysis of HS-WEDM;

高速走絲線切割機故障模式及其原因的分析

In this paper,the characteristic and total design ideal of five-axis WEDM machine for PCD milling cutters were introduced.

介紹了五軸金剛石銑刀線切割機的特點和總體設計思想。

In this paper,the machining characteristic in five-axis WEDM machine for PCD woodworking milling cutters and the mechanical structure and control system of increased CNC dividing rotor were introduced,and the hardware and software constitutes in this numerical control system of WEDM machine were studied.

介紹了五軸金剛石木工銑刀線切割機的加工特點以及新增數控分度回轉軸的機械結構和控制系統,并研究了該線切割機數控系統的硬件和軟件構成。

A new type of software for controlling multi functional numerical wire cutting machine is introduced,which is programmed in Visual Basic.

介紹一款用VisualBasic開發的新式數控線切割機控制軟件。

The improvement of the input system of linear cutting machine;

電火花線切割機床數據輸入系統的改進

The DK7725e type linear cutting machine is studied in the paper.

通過對DK7725e型線切割機床的應用與研究,分析了影響加工精度的因素,總結出保證線切割機床加工精度及提高產品成品率的措施。

Some commonly used machining process skill and programming method were introduced when using low speed WEDM machine to machine precision mold.

敘述了在使用低速走絲電火花線切割機床加工精密模具時,一些常用的加工工藝技巧及編程方法。

In order to ensure requirement of taper and size in machining complex mold cavity,it must depend on precision and reliable programming method of WEDM machine.

為使復雜型腔能在加工中保證錐度及尺寸要求,必須以線切割機床的精度和可靠的編程方法為前提。

NC EDM wire-cut machine

電火花數控線切割機床

NC wirecut EDM machine

數控電火花線切割機床

working liquid for water-based wirecutting machine

水基線切割機工作液

taper wire-cut EDM machine

錐度電火花線切割機床

super CNC wirecutting machine

電火花數控線切割機

Application of FIKUS WEDM Machine in Low-Speed Wire Cutting Program

FIKUS線切割機在慢走絲線切割編程中的應用

Discuss on Multi-Times Cutting Technology of Move Back and Forth Run-Wire WEDM

往復走絲電火花線切割機床多次切割技術探討

Design and Implement of Wire Tension Control System for Multi-wire Saw

多線切割機線張力控制系統設計實現

large NC wire-cut EDM machine

大型數控電火花線切割機床

electrosparking photo-electric tracking wire-cutting machine

電火花光電控線切割機床

The Research on CAD/CAM for High-speed Wire Electro-Discharge Machine;

高速走絲電火花線切割機CAD/CAM研究

A Design for the CNC system of the Wire Cutting Machine Tool;

DK3220型線切割機床數控系統的改造

Effect and Elimination of the Grinding Heat of Multi-wire Saw

多線切割機磨削熱的不良影響及消除

The Study on WEDG Craft Based on the Wire Electrode Cutting Machine;

基于線切割機的線電極放電磨削工藝的研究

Design and Simulation of the Wire Drive Mechanism on WEDM-LS

低速電火花線切割機走絲機構的設計與仿真

Constant Tension Mechanism for HS-WEDM with Compound Wire-moving Mode

快走絲線切割機床恒張力復合運絲機構研究

Research of Motion Control System for LS-WEDM Machine;

慢速走絲線切割機床運動控制系統的研究

The Research and Development of the Wire-feeding System for the WEDM-LS;

慢走絲線切割機床走絲系統的研究與開發