alloying with trace elements

Application of V-microalloying Technology in Producing HRBL600 Reinforced Bar;

釩鐵微合金化工藝在HRBL600鋼筋生產中的應用實踐

The effect of V,N,Nb microalloying on the microstructure and properties of containing strip rolled from thin slab;

V、N、Nb微合金化對薄板坯連軋帶鋼組織和性能的影響

Development History of Nb-microalloying Technology and Progress of Nb-microalloyed Steels;

Nb微合金化和含鈮鋼的發展及技術進步

A Study on Rare Earth Metal Microalloying of Alloy Steel;

合金鋼的稀土金屬微合金化研究

Technical Study on Electromagnetic Casting and Microalloy of High Strength Aluminum Alloys;

高強鋁合金微合金化與電磁成型技術的研究

The core of the new manufacturing process for the high quality upgraded Manganese steel is fractionation modification,composite inoculation and microalloying technique,which are affected each other.

優質改性高錳鋼生產新工藝的核心是將分級變質處理、復合孕育處理和微合金化技術三位一體,互為作用。

Effects of micro-alloying with Sc and Ti on the microstructure and mechanical property of Al-Mg based alloys;

復合微合金化對Al-Mg合金組織與性能的影響(英文)

Analysis and Study of Steel Plate with Nb Micro-alloying;

Q345中板加Nb微合金化生產工藝分析與研究

Micro-alloying and Controlled Rolling of X70 Steel with Less Pearlite used for Pipeline;

少珠光體管線用鋼X70的微合金化及控制軋制

A high performance tobacco stem untying tool has been developed based on a microalloyed high-carbon low-alloy tool steel and its low-temperature secondary hardening technique.

研制出一種微合金化高碳低合金工具鋼及其低溫二次硬化工藝技術,其主要力學性能達到國際先進水平,由此研制生產出可替代進口的高性能煙葉解把刀,其主要使用性能及性價比明顯超過國外進口產品。

The continuous cooling transformation of microalloyed low carbon bainitic steel after ausforming was investigated by using a Gleeble 1500 thermomechanical simulator.

利用Gleeble 1500熱模擬試驗機研究了微合金化低碳貝氏體鋼形變連續冷卻轉變行為,并采用OM和TEM分析了冷卻速度對組織的影響規律。

The cleanliness of the steel has been improved by adoption of such a few processes as Nb-V-Ti micro alloying, controlled rolling and accelerated cooling as well as adjustment of micro alloy elements and argon bubbling, and the morphology of sulphide changed by Ca treatment; and segregation of elements in steel reduced and the toughness of the steel raised by implementation of appropriate contin.

該鋼采用Nb-V-Ti微合金化加控軋控冷的生產工藝。

The comprehensive properties of steel plate, particularly the low temperature impact toughness of the steel plate have been dramatically improved by proper design on te chemical compostions and adoption of micro alloying, control rolling and accelerated cooling technologies in view of the practical conditions of stee.

通過對化學成分的合理設計及制訂適合該廠冶煉、連鑄、軋制的工藝 ,采取微合金化和控軋控冷相結合的有效技術措施 ,提高鋼板的綜合性能 ,特別是低溫沖擊韌性。

The development of non quenched and tempered free cutting steel 30MnVS for saloon cars was successful with the use of some technologies such as adding S by wire feeding in electric furnace,micro alloying,argon stirring in ladle etc The impact toughness is increased with S content increase

通過電弧爐喂硫線技術、微合金化技術、包底吹氬技術成功的開發了轎車用易切削非調質鋼30 Mn VS,各項性能檢測表明 ,隨著硫含量的提高 ,沖擊功將增

Research on RE Micro-alloy Effect in Self-fusion Alloy;

RE在自熔合金中微合金化作用的研究

Microstructural Evolution and Properties in Microalloyed Aluminium Alloys;

微合金化鋁合金的微觀組織演變與性能研究

Study on Technology of Nb-V Micro-alloyed HRB500 Ribbed Bar

鈮釩復合微合金化HRB500鋼筋工藝研究

Investigation of Grain Refining by Transformation in Nb-microalloyed CFB/M Steel

Nb微合金化CFB/M鋼相變細化研究

Technical Study on Electromagnetic Casting and Microalloy of High Strength Aluminum Alloys;

高強鋁合金微合金化與電磁成型技術的研究

Study on Aging and Thermal Deformation Behavior of CuNiSi Series Alloys;

微合金化CuNiSi系合金時效及熱變形行為研究

Research on Rapture Performance and Microalloying Effect of 7xxx-series Aluminum Alloy

7xxx系鋁合金斷裂性能與微合金化的研究

Effects of Tin Microalloying on Microstructure and Mechanical Properties of Mg-Zn-RE-Zr Alloys

Sn微合金化對Mg-Zn-RE-Zr合金組織及性能的影響

Research Progress of High-strength High-conductivity Copper Alloy with Chromium and Zirconium Micro-alloying

鉻鋯微合金化高強高導銅合金的研究進展

Micro-alloying effect of Mg-8Li-3Al alloy with yittrium addition on microstructure

Mg-8Li-3Al合金中稀土Y微合金化對顯微組織的影響

DETERMINATION AND ANALYSIS OF CCT CURVES OF P510L STEEL

P510L釩微合金化鋼的CCT曲線及其顯微組織

Production Trial on Hot Rolled Ribbed Reinforced Bar and Microalloyed Vanadium-Titanium

熱軋帶肋鋼筋釩鈦微合金化生產試驗

Steelmaking Process of V Micro-alloying High Strength Steel in EAF

釩微合金化高強鋼電爐煉鋼工藝研究

Improvement of Strength and Toughness of Casting Aluminium Alloy ZL107 with Minim Alloy Element;

ZL107鑄造鋁合金的微量合金強韌化

DISSOLVE AND AGE PRECIPITATION OF THE MICROALLOYED CARBIDE IN THE MICROALLOYED STEEL

微合金鋼中微合金碳化物的溶解與時效析出

Study of Ni-P Alloy Electroless Plating on Boron Nitride Particles

氮化硼微?；瘜W鍍鎳-磷合金工藝研究

Optimal Design and Physical Metallurgy of Multilple Alloy Steel Containing Nb and Ti

鈮、鈦復合微合金鋼的優化設計及物理冶金

Effects of Electromagnetic Stirring and Alloying on Microstructure and Performance of AZ91 Alloy;

電磁攪拌、合金化對AZ91合金顯微組織與性能影響