four stand mill

Casting Mill Housing of 13060-6 Four-Roll Reversible Cold-Rolling Mill;

13060-6四輥可逆冷軋機機架的鑄造

A hybrid method was proposed based on the combination of parameter sensitivity analysis and sequential optimization,a parameter model for 550 mill housing was established,and the dimensions were optimized with ANSYS,where minimizing volume was considered as the first objective function.

提出了一種基于參數敏感度分析的順序優化方法,利用ANSYS軟件建立了550軋鋼機機架的參數化模型,并對軋機機架尺寸進行了優化設計。

Facing to the huge size,complicated shape and high processing precision of mill housing and relying on the knife tool processing modification and the present machining capacity the suitable measurements are taken and the mill housing is perfectly manufactured.

針對軋機機架體積龐大、形狀復雜、加工精度高等特點,利用現有設備機加工能力,改進加工刀具,采取適當的措施,圓滿地完成了軋機機架的制作任務。

Analysis of ruggedness rigidity and vibration for 2150 hot tandem mill frame;

2150熱連軋機機架強度剛度和振動分析

Analysis of mechanical behavior of mill frame based on finite element method

基于有限元的軋機機架的機械性能分析

Aimed at the vibration problem of 1700 four rollers strip mill,by using the large FEM software,structure analysis model of mill frame was established;and the natural frequency and the vibration models which are easily be excited were obtained.

針對1700四輥帶鋼軋機振動問題,利用大型有限元軟件ANSYS,建立機架的結構分析模型,得出該軋機機架容易激發的固有頻率和振型;并利用結構力學理論對典型模態進行了驗證。

Modelling study of the elastic deformation for 4-h mill;

四輥軋機彈性變形解析模型的研究

This paper was to discuss the elastic deformation of rollers and interaction between work rollers and the strip during the roller milling process of a 4-h mill,by analyzing stress and deformation of rollers,put forwards a concise and practicable mathematic model of roller gap's shape,which resulted from some relevant factors,such as rolling pressure,bending force and so on.

針對軋制過程中軋輥的彈性變形和軋輥與軋件間的相互作用,通過對四輥軋機輥系變形和受力狀況的分析,從理論上詳細推導了直觀的有載輥縫形狀函數,明確了有載輥縫形狀函數與相關因素的對應關系。

Housing Casting Process of 1725 mm Double Housing Steckel Mill

1725mm雙機架爐卷軋機機架的鑄造

Analysis on 1150 bloomer housing by 3-dimensional finite elements

φ1150初軋機機架的三維有限元分析

Three dimensional finite element analysis of 2400mm hot mill stand

2400mm熱軋機機架三維有限元分析

Frame Working Accuracy Control of Large-Scale Slab Nand Mill;

大型板帶軋機機架機械加工精度的控制

Analysis of mechanical behavior of mill frame based on finite element method

基于有限元的軋機機架的機械性能分析

Study on the Rolling Schedule Optimization and Emulation of Five Tandem Cold Rolling Mills

五機架冷連軋機軋制規程優化設計及仿真

Vibration of Finishing Stands in Hot Strip Mill and Suppression Measure

熱軋寬帶鋼精軋機組機架振動分析及抑制措施

This is our double - stand heavy plate mill line.

這是我廠的雙機架厚板軋機生產線。

Flatness Finite Element Simulation Analysis for the Five-stand Cold Tandem Rolling Mill;

五機架冷連軋機板形有限元模擬分析

Study on Tension Control System of 1370 Five Stands Tendem Cold Mill

1370五機架冷連軋機張力控制系統研究

Electrical Control System of Narrow Strip of Five-stand Tandem Cold Rolling Mill

窄帶鋼五機架冷連軋機電氣控制系統

HGC servo control system in cold mill

雙機架冷軋機HGC伺服控制系統分析

REDUCTION OF STRIP BREAKING FAILURE IN THE 2-STAND COLD ROLLING MILL

降低雙機架冷軋機斷帶率的工藝探討

Study on Schedule-Optimization Practice for Eight-Roller Five-Stand Tandem Cold Rolling Mill

八輥五架冷連軋機軋制規程的實踐研究

Founding of Heavy Steel Castings-The Blooming Mill Housing Used for Ma Steel 2250mm hot mill

馬鋼熱軋2250mm初軋機架大型鑄鋼件的鑄造

PLC-Based Simulation Platform for Single Stand of Hot Strip Finish Rolling

基于PLC的熱軋帶鋼精軋單機架仿真平臺

To press with a mangle.

軋壓用軋布機來軋壓

combination blooming billet mil

初軋-軋坯聯合軋機