1. <b id="x0hdm"></b>
  • <sup id="x0hdm"></sup>

    1. impoverishment

      基本解釋固態合金損失

      網絡釋義

      1)impoverishment,固態合金損失2)solid alloy,固態合金3)semi-solid alloy,半固態合金4)Semi solid Alloy,半固態合金5)Liquid solid Alloy,液固態合金6)solid state alloying,固態合金化

      用法和例句

      The molecular interaction volume model(MIVM) and the regular solution model have been applied to fit the activities of components in 37 binary solid alloys.

      應用分子相互作用體積模型和正規溶液模型對37個二元固態合金體系的組元活度進行了擬合。

      In this thesis, the thermodynamic properties of 37 binary solid alloys have been evaluated and fitted by the molecular interaction volume model (MIVM) and the regular solution model.

      本文利用分子相互作用體積模型和正規溶液模型對37個二元固態合金體系的熱力學性質進行估算、擬合,結果表明:在二元固態合金中,MIVM的估算效果要稍差于正規溶液模型,但MVIM擬合效果要好于兩模型的估算效果。

      Rheologic Forming Theory of Semi-solid Alloy Part I: Rheologic Filling Theory;

      半固態合金流變成型工藝理論——第1部分流變充型理論

      Critical condition on rheological filling of semi-solid alloy;

      半固態合金流變充型的臨界條件

      This paper introduced the advantages to produce semi-solid alloy by using the inclined cooling plate such as its short flow,low cost,simple equipment,high production efficiency,and it can produce big size roughcast.

      介紹了傾斜冷卻板法制備半固態合金流程短、成本低、設備簡單、生產效率高,同時又能生產較大尺寸的半固態坯料等的特點,指出了傾斜冷卻板法制備半固態合金的原理及其影響因素,并闡述了傾斜冷卻板法在半固態加工中的應用及其應用前景。

      The results show that the optimum gap between roll and shoe varies in 2~3?mm; pouring temperature can affect grain size and its shape of semi solid alloy.

      利用自行設計的單輥剪切 /冷卻 (SCR)試驗機對LY11合金進行了半固態凝固實驗 ,研究了工藝條件對LY11半固態合金組織的影響。

      The results indicate that the transient peak of apparent viscosity of semi solid alloys increases with expanding the rest time under the same experimental conditions.

      結果表明 ,在相同的剪切條件下 ,隨剪切停留時間的增加 ,瞬時峰值表觀粘度增加 ,說明剪切停留期間半固態合金初生α相形態發生了變化 ;對半固態合金初生相形態觀察發現 ,剪切停留促使初生相發生了“團聚”或“合并” ,而且初生相形態變化的程度取決于剪切停留時間和初生相的退化程度 。

      最新行業英語

      行業英語

      又大又粗又硬又爽又黄毛片_插B内射18免费视频_黄色网站在线视频_国产真人一级毛片在线视频
      1. <b id="x0hdm"></b>
    2. <sup id="x0hdm"></sup>